• 阿斯顿发水电费撒地方 2019-06-14
  • 夺取新时代中国特色社会主义伟大胜利 2019-06-09
  • 你来我往!巴萨黑城墙"空中拦网" 澳洲队长点射1-1! 2019-06-08
  • 2018“我们的中国梦”文化进万家活动在兰考启动 2019-06-08
  • 新华社评论员:弘扬伟大民族精神 凝聚强大精神动力——一论习近平总书记在十三届全国人大一次会议上的重要讲话 2019-06-08
  • 北京市安全生产督察组进驻三部门 开始为期三周安全生产督察工作 2019-06-08
  • 财经 —频道 春城壹网 七彩云南 一网天下 2019-06-07
  • 在全面从严治党上要有新作为 2019-06-07
  • 从三大视角透视中国经济新活力:经济结构更优 2019-06-07
  • 2017空调产业报告显示:线上零售额占比攀升 2019-06-06
  • 新时代新平台新机遇“一带一路”大型网络主题活动 2019-06-06
  • 150秒!速览习主席青岛峰会精彩瞬间 2019-06-06
  • 外媒热议习近平讲话:中国军队现代化速度超越西方想象 2019-06-06
  • 自然型社会和规则性社会,是会随着科技的改变而发生改变的,当然只有规矩也就是制度才能规范人的行为,所以国家是不会灭亡的,但国家的形式是会发生改变的。 2019-06-05
  • 婆媳矛盾引家庭纠纷 司法调解续亲情促和谐 2019-06-05

  • International Training Programs 2004
    Major Events in 2003
    Key International S&T Cooperation Projects
    Home > International Cooperation>International Training Programs 2004

    Foreword
    China is a development nation with a large population but limited resources. In the new century, strengthening China’s cooperation with other developing nations in the fields of science and technology and economy has become unprecedentedly urgent and important. Such cooperation will obviously create ways and means for taking full advantage of the respective strength of different countries, alleviating poverty, accelerating economic development and making fortunes for their people. Such cooperation will also become a stimulus to the south-south cooperation and enhance our international competitiveness and risk resistance so as to allow more positive involvement in the economic globalization process, safeguarding our economic interests and security, and enhancing the visibility of developing nations in south-north dialogues.
    Since its implementation of “reform and opening” policy, China has witnessed fast growth of its economic and S&T activities, turning out numerous technologies applicable to the needs of developing nations and attracting their attention. I’m confident that the diffusions and applications of these Chinese proven technologies in developing nations will benefit the economic development of recipients and the improvement of their technological levels. The Chinese Government has always paid great attention to S&T exchanges and cooperation among developing nations. Under the principle of equality and mutual benefits, results sharing and intellectual properties protection, the Chinese Government is willing to let you be aware of these technologies through selected seminars so as to promote our common development in the fields of S&T and economy.
    In 2004,China is scheduled to launch 31 international seminars dedicated to developing nations, covering a variety of topics such as agriculture, energy, CAD, environment protection, medicine and etc. we have made details of these events available in this brochure and welcome the participate of friends from different countries for their own interests and needs.

    Dr. Yu Ying
    Director General
    Department of International Cooperation
    Ministry of Science and Technology
    The People’s Republic of China


    The 2nd International Training Course on Digital Medical Imaging Equipments

    October, 2004
    Shenyang, China
    Working language: English

    Objectives:
    Neusoft Group Ltd. Is a large-scale software enterprise of China, which is specialized in manufacturing ct scanners, mri system , x-ray equipments and color Doppler ultrasound scanner with its embedded software. In a short five years, the company has developed twenty-six kinds of products in six series, which has held much share of domestic market; among them, ct scanners has ranked the second market share only following after GE Company (the famous company in USA); sale of low-field mri system has been the No.1 in Chinese market, which far exceeded Siemens and GE Company. Neusoft Group Ltd. Has become the leader in the digital medical industry with its sales revenue RMB 550 million.
    With the development of business, the company is emphasizing on the strategy into international market. The company has penetrated into international market since 2001, and has got a preliminary achievement in some developing countries, such as Turkey, Vietnam etc. During the process of running the international market, training as a kind of method of service, has become an important measure to win the international market. Neusoft Group Ltd. Has a well products line and a strong technical strength, so it is fully practical for the company to undertake the international training course of digital medicine imaging equipments.
    Programs:
    1. Principle, structure, performance, clinical application and operation for CT produces;
    2. Principle, structure, performance, clinical application and operation for MRI produces;
    3. Principle, structure, performance, clinical application and operation for X-ray produces;
    4. Principle, structure, performance, clinical application and operation for Color Doppler produces.
    Organizer:
    Neusoft Group Ltd.
    Address: Neusoft Park, Hunnan Industrial Area, New & High-Tech Development Zone, Shenyang, China.
    Postcode:110179
    Coordinator: liu Wenzhi
    Tel: 86-24-23783396
    Fax: 86-24-23782797
    E-mail: [email protected]



    The Fourth International Training Workshop on Technological Innovation for Small and Medium-sized Enterprises based on Science and Technology

    September, 2004
    Beijing, China
    Working language: English

    Objectives:
    The training workshop will introduce to developing countries the experiences of technological innovation for science and technology based on small and medium and enhance the cooperation between China and these countries. It will promote the progress of Chinese industrialization and internationalization of achievement on science and technology.
    Programs:
    1. Torch Program and development of small & medium-sized technology-based enterprises in China;
    2. A general picture of zhongguancun science park;
    3. innovation of credit guarantee and development of high-tech business;
    4. Structure change, environment and policies of entrepreneurial firms in China;
    5. Upgrading SME competitiveness through national innovation systems;
    6. The construction of Beijing IBI and incubation base;
    7. The construction and prospects of advanced business park;
    8. Project introduction;
    9. On-the-spot investigation;
    10. Case study.
    Organizer:
    Beijing International Business Incubator
    Address: No.9, Kexing Road, Fengtai District, Beijing, China.
    Postcode:100070
    Coordinator: Wei Wenjiang
    Tel: 86-10-63729939
    Fax: 86-10-63729939
    E-mail: [email protected]



    The International Training Course on the Application of Information & Energy Optoelectronics

    October 18-29,2004
    Wuhan, China
    Working language: English

    Objectives:
    The training workshop will introduce the Optoelectronic technology and its application of china to developing countries, East Europe countries, medium Asia countries, Russia and transitional economics countries and help them to upgrade the level in optoelectronic technologies and its application. The workshop will promote the cooperation between China and these countries in these fields on optoelectronic industries.
    Programs:
    1. Optical device and integration;
    2. Optical device-Isolator;
    3. CATV optical module;
    4. Difraction grating core component in optical pick-up to track;
    5. Industrial and medical laser and applications;
    6. Laser and information optoelectronic technology.
    Organizer:
    Wuhan East Lake Hi-tech Innovation Center
    Address: 5th Floor, 7-4th Building, Guangdong Science Park, Wuchang, Wuhan, China.
    Postcode:430074
    Coordinator: Chai Yan
    Tel: 86-27-87412659-8004
    Fax: 86-27-87406310
    E-mail: [email protected]


    International Training Course on Computer Aided Design(CAD) of City Planning, Architecture Design and Interior Decoration

    September, 2004
    Guangzhou, China
    Working language: English

    Objectives:
    To introduce the achievement of research and development on software in China; to demonstrate the technology developed by Chinese on computer aided design(CAD) of city planning, architecture design and interior decoration; to promote the bilateral cooperation and exchange on software; to promote export of China’s software technology.
    Programs:
    1. The development trend on CAD of architecture industry in China;
    2. The characteristic on CAD of Chinese architecture industry and its adaptability to developing countries;
    3. The effectively method to extend computer application software and experience;
    4. The theory, application, maintenance and technical support on computer application software of architecture industry;
    5. Professional investigation and practice.
    Organizer:
    Guangzhou Hi-Tech Incubation Center
    Address: Room 306, No.242 Tianhe Dong Road,Guangzhou, China.
    Postcode:510620
    Coordinator: Liu Yun(Vanessa Liu)
    Tel: 86-20-87578719/85514199
    Fax: 86-20-85513689/87578719
    E-mail: [email protected]



    International Workshop Method & Technology in Physics Measurement for Developing Countries

    October 21-November 3, 2004
    Beijing, China
    Working language: English

    Objectives:
    Introduce the achievements of China in Physics measurement technology; promote international exchange and cooperation with developing countries in physics research field; improve the physics measurement skill in developing countries; extend the application of the Chinese physics measurement product in developing countries.
    Programs:
    1. Equipments for laser and temperature detection;
    2. Technology of weak signal detection;
    3. Measurement of electricity and magnetization;
    4. Exchange of information among the participants;
    5. Field visit to Chinese instrument companies.
    Organizer:
    Tianyu Wuke Exchange Center for Science & Technology, Institute of Physics, CAS
    Address: No.8, 3rd South Street Zhonguancun, Haidian District, Beijing, China.
    Postcode: 100080
    Coordinators: Tang Ning, Zhangfulin
    Tel: 86-10-82649287
    Fax: 86-10-82649467
    E-mail: [email protected]




    International Training Workshop on Advanced Technology of Controlled Environment Cultivation

    September 13-24, 2004
    Beijing, China
    Working language: English

    Objectives:
    This training workshop aims to introduce the research achievements and advanced as well as applicable technology of facility culture technology in China, promote the development and application of facility culture technology in developing countries and upgrade their capacities in addressing resource and environmental problems. Meanwhile, it will speed up the transfer of facility culture technology and relevant facilities to developing countries and strengthen the bilateral cooperation and international exchanges between China and the other developing countries.
    Programs:
    1. Fundamentals and new trends of facility culture technology;
    2. Type, structure and optimization of facility culture facilities;
    3. Industrial-scale propagation technique of facility culture;
    4. High-yield and high quality cultivation system of facility culture;
    5. Organic-ecological soilless culture technology;
    6. Integrated pest and disease control technology of facility culture;
    7. Postharvest technology of facility culture products;
    8. Experimental operation and demonstration;
    9. Technical visits;
    10. Exchange of work experience among trainees.
    Organizer:
    Center of Agricultural Resource and Environment, Chinese Academy of Agricultural Science (CAAS)
    Address: No.2 Southern Street of Zhonguancun, Haidian District, Beijing, Department of International Cooperation, CAAS
    Postcode: 100081
    Coordinator: Ma Fei
    Tel: 86-10-68919477
    Fax: 86-10-62174060
    E-mail: [email protected]



    International Training Workshop on Small Bamboo Daily Product Processing Technologies and Machines

    September, 2004
    Lin’an and Anji of Zhejiang, Yiyang of Hunan, China
    Working language: English

    Objectives:
    Through the practical training, get the trainees familiar with the production techniques of small bamboo daily handicrafts and the performance of the relative machines. Enhance the technology exchange in related fields among developing countries and improve the bamboo development and ecological environment of these countries.
    Programs:
    1. A general introduction to China’s bamboo development;
    2. Requirement on the quality of different bamboo products;
    3. Bamboo preservation technologies;
    4. Bamboo processing machines;
    5. Processing techniques and machines for bamboo daily products; bamboo tooth picks, bamboo skewers; bamboo curtain, bamboo mats, bamboo decoration boards, etc;
    6. Management model of bamboo processing enterprises.
    Organizer:
    International Farm Forestry Training Center, Chinese Academy of Forestry (CAF)
    Address: International Farm Forestry Training Center, CAF
    Postcode: 100091
    Coordinators: Zhu Zhaohua, Jiang Chunqian
    Tel: 86-10-62889093/64706161
    Fax: 86-10-62888345/64703166/2166
    E-mail: [email protected]; [email protected]



    The 3rd International Workshop on Yogurt Production Technology and Quality Control System

    June 20-July 4, 2004
    Harbin, China
    Working language: English

    Objectives:
    Training through five subjects on technology and its quality control system for yogurt production, the participants can realize common problems appear during the production in relation with quality controls and methods to solve these problems and learn how to use HACCP and yogurt evaluation technique and at the same time master technical know-how for yogurt production and measures for its quality control system. The course can develop the students ability to solve problems themselves on practical operation.
    Programs:
    1. Starter culture preparation methods;
    2. Technical datum controls during processing;
    3. Quality insurance and testing technique;
    4. Yogurt evaluation methods;
    5. HACCP for yogurt production.
    Organizer:
    National Research Center of Dairy Engineering and Technology, Heilongjiang Dairy Training Center
    Address: No.337 Xue Fu Road, Harbin, China
    Postcode: 150086
    Coordinator: Yu Meiyan
    Tel: 86-451-86661498
    Fax: 86-451-86661498
    E-mail: [email protected]


    The Third International Training Workshop of Antiviral Technology of Chinese Medicine

    September, 2004
    Jinan, China
    Working language: English

    Objectives:
    Through more than ten days’ studying and exchanging, students will have a relative understanding of basic theory of traditional Chinese medicine, Chinese pharmacology and daily antiviral Chinese herbs. And they will have a deep recogniti on of technology on diagnosis and treat of traditional Chinese medicine, antiviral effect and mechanism of Chinese herbs. The training course will play a positive role in promoting the lawmaking and it will make Chinese medicine spread widely in developing countries. What’s more, it will improve foreign people’s health standard with the full use of Chinese herbs.
    Through the communications of students from different countries, we can know the relevant laws, statutes, policies and current situation of traditional medicine in their countries. And it can establish the foundation of spreading and applying of traditional Chinese medicine in these countries. Through the positive participate of internal pharmacy industries of Chinese medicine, we can introduce industries and products; strengthen the international cooperation and exchange of traditional Chinese medicine; and make traditional Chinese medicine correspond with the international routines.
    Programs:
    1. Brief introduction of developing dynamic state and relevant laws and statutes of traditional Chinese medicine home and abroad;
    2. Introduction of basic theory of traditional Chinese medicine and Chinese pharmacology, and the function of daily antiviral Chinese herbs and patent medicines;
    3. Introduction of traditional Chinese medical treatment on influenza, viral hepatitis and SARS; 4. Extraction and separation techniques for active ingredients of antiviral Chinese herbs;
    4. Normalized cultivating of antiviral Chinese herbs;
    5.Visit and clinical view and emulation in Chinese medical hospitals, industries and normalized planting base of Chinese herbs;
    6. Brief introduction of traditional Chinese culture and the relationship between traditional Chinese medicine and culture;
    7. Communications of experience and techniques on respective traditional medicine among students;
    8. Discussions on how to make traditional Chinese medicine face to the world among undertaking units, Chinese medical industries and students.
    Organizer:
    Shandong Academy of Chinese Medicine
    Address: No.7 Yanzishan West Road, Jinan, China
    Postcode: 250014
    Coordinator: Zhang Xilin
    Tel: 86-531-2968473
    Fax: 86-531-2968473
    E-mail: [email protected]



    Rapid Prototyping Manufacturing Technology and its Application

    May 11-20, 2004
    Shanghai, China
    Working language: English

    Objectives:
    The training course aims to give the participants an insight into the application of the RPM software, which is both economical and practical, copyrighted by China, to help them learn the advanced RPM technology and the fundamental theory of advanced manufacturing molds. It also aims to increase the efficiency of, bring profits to their companies and improve the quickness to the international markets and increase the mutual understanding between China and participants’ countries on advanced manufacturing technology, promote the bilateral technical and economical cooperation.
    Programs:
    1. Introduction to the RPM technology and development trend;
    2. The status of R&D about RPM technology in China;
    3. Focus on the introduction to some RPM facilities and their application;
    4. Exchange of the experience in the application of the methods concerned;
    5. Visited the enterprises using RPM technology;
    6. Professional visit to some service centers using advanced manufacturing technology;
    7. Discussing and exchange.
    Organizer:
    Shanghai Training Center of Ministry of Science and Technology
    Address: No.299, Keyuan Road, Zhangjiang, Pudong, Shanghai, China
    Postcode: 201203
    Coordinator: Chen Jialin
    Tel: 86-21-50800938
    Fax: 86-21-50801484
    E-mail: [email protected]


    International Training Workshop on Engineering Design (CAD) Technology

    September 12-26, 2004
    Shanghai, China
    Working language: English

    Objectives:
    To introduce China’s great achievement of the application in Engineering Design (CAD) Technology; to display the technology developed by Chinese on Engineering Design (CAD) Technology; to promote the multilateral cooperation and exchange on software; to promote export of the software technology copyrighted by China.
    Programs:
    1. The development trend on Engineering Design (CAD) Technology in China;
    2. The characteristics on CAD of Chinese Engineering and architecture industry and its adaptability to developing countries;
    3. The effectively method to extend computer application software and experience;
    4. Professional seminar and investigation.
    Organizer:
    Shanghai Training Center of Ministry of Science and Technology
    Address: No.299, Keyuan Road, Zhangjiang, Pudong, Shanghai, China
    Postcode: 201203
    Coordinator: Chen Jialin
    Tel: 86-21-50800938
    Fax: 86-21-50801484
    E-mail: [email protected]


    Training Course on Application of Marine Biotechnology

    September 8-20, 2004
    Qingdao , China
    Working language: English

    Objectives:
    In order to promote marine biotechnology R&D in developing countries, and to broaden international communication and cooperation, Institute of Oceanology, Chinese Academy of Sciences (CAS) will organize an international training course on application of marine biotechnology under the auspices of Ministry of Science and Technology of China (MOST).
    Programs:
    1. Current status and trends of marine biotechnology R&D;
    2. Shrimps and mollusks;
    3. Seaweeds;
    4. Microalgae;
    5. Marine natural products;
    6. Healthy and sustainable mari-culture;
    7. Strain selection and breeding technology in cultivated algal species;
    8. Experiments on molecular labeling techniques in economic algal species.
    Organizer:
    Institute of Oceanology of Chinese Academy of Sciences
    Address: No. 7 Nanhai Road, Qingdao, Shandong, China
    Postcode: 266071
    Coordinator: Ma Junying
    Tel: 86-532-2898623
    Fax: 86-532-2898620/2898918
    E-mail: [email protected]


    Intl’s Training Course of
    Smtcl’s Creating Notability

    September 1-14, 2004
    Shenyang, China
    Working language: English

    Objectives:
    Make the trainees to understand fully the know-how of Shenyang machine tools, know well the qualities and structures of the products Shenyang Machine Tool Co. Ltd (SMTCL as follows); standardize the operating programs that the agents and distributors promote the sales of SMTCL’ s products in the international market. Highlight the features of products, set up brand of Shenyang Machine Tool in the international market; provide strongly support of before-sale and after-sale service to international sale channel of SMTCL’ s products by utilizing specialized training ; summarize and accumulate the experiences of SMTCL on international trainings for overseas customers, and lay a foundation for long-term and high-efficient training overseas customers.
    Programs:
    1. Itemize the structures of universal lathes, low-cost CNC lathes, universal CNC lathes, turning centers, pipe machining machines and special purposed machines, and introduce the means and control processes for products development and quality system;
    2. Itemize the structures of universal radial drilling machines, CNC drilling machines, universal boring and milling machines, CNC boring and milling machines, boring and milling machining centers, and introduce the means and control processes for products development and quality system.
    Organizer:
    Shenyang Machine Tool Co. Ltd.
    Address: No. 10-1 Beierdong Road, Tiexi District, Shenyang, China
    Postcode: 110025
    Coordinator: Mei Dongyan
    Tel: 86-24-25865510
    Fax: 86-24-25864958
    E-mail: [email protected]



    Training of Advanced Welding Technology and Equipment

    August 1-14, 2004
    Harbin, China
    Working language: English

    Objectives:
    Introduce welding technology achievement and development in China; let the welding engineers and technicians to have better understanding about Chinese welding consumables and equipment, to know the technical characteristic and how to use these welding consumables and equipment in industries; promote technical exchanges and technical support between China and developing countries; promote welding technology development and industrial application in developing countries; promote Chinese products export to these developing countries.
    Programs:
    1. The situation and development of welding technology in China;
    2. Welding consumables and procedures for low allow steel;
    3. Welding consumables and procedures for stainless steel;
    4. Brazing technology and industrial application;
    5. Welding equipment and automation;
    6. Laboratory and workshop practice, visiting factories.
    Organizer:
    Harbin Welding Institute
    Address: No. 111, Hexing Road, Harbin, China
    Postcode: 150080
    Coordinator: Jin Shi zhen
    Tel: 86-451-86334874
    Fax: 86-451-86325871
    E-mail: [email protected]


    International Plastic Machinery Technical Course

    July 6-27, 2004
    Jiaozhou, China
    Working language: English

    Objectives:
    Providing the assistance of plastic machinery technology to the developing countries; Training technicians from the developing countries to enhance the plastic machinery industry developing of those countries; strengthening the international cooperation and exchange to extend Chinese plastic machinery products influence over the world; portraying the research and development achievements of Chinese plastic machinery industry.
    Programs:
    1. Chinese plastic machinery industry status and prospect;
    2. Products introduction of Qingdao LuHua Plastic Machinery Co., Ltd;
    3. Plastic machinery technique theory, manufacturing know-how and technology;
    4. Advanced management system and experience of Qingdao LuHua Plastic Machinery Co., Ltd;
    5. Plastic Machinery test and maintenance;
    6. Field visiting and study.
    Organizer:
    Qingdao LuHua Plastic Machinery Co., Ltd
    Address: Fuan Industrial Park, Jiaozhou, Shandong, China
    Postcode: 266300
    Coordinator: Tang Guangli
    Tel: 86-532-2297288
    Fax: 86-532-2297588
    E-mail: [email protected]


    International Course on New Technologies of Agricultural Engineering

    April 10-24, 2004
    Beijing, China
    Working language: English

    Objectives:
    To provide up-to-date information, knowledge and practical management experience on agricultural engineering to people mainly from developing countries, who are engaged in research & development, manufacturing, management and sales in agricultural machinery industry. In order that they can use these newly gained experience to make a greater contribution to the development of agricultural engineering under their own geographical social economic conditions.
    Through lectures and technical visits, the participants will be able to: update their knowledge on R&D, manufacturing, management and sales in the field; understand in depth the history, present situation and achievement of agricultural engineering in China; master the key points of principles, performance and available skills on new products and new technologies of agricultural engineering; promote understanding & friendship and to provide the opportunity for international cooperation and exchange as well as trade in concerned fields.
    Programs:
    1. Chinese agricultural engineering & mechanization;
    2. Rural renewable energies application;
    3. Grain storage;
    4. Agricultural production & side-line products processing;
    5. Potato & cassava processing;
    6. Bio-tech application in agriculture;
    7. Modern precision agriculture;
    8. Fermented food processing;
    9. Fruit processing;
    10. Dry farmland cultivation;
    11. Country report.
    Organizer:
    Chinese Academy of Agricultural Mechanization Sciences
    Address:No. 1 Beishatan, Deshengmenwai, Beijing, China
    Postcode: 100083
    Coordinators: Yang Dong, Zhao Xiaopeng
    Tel: 86-10-64883502/64882156
    Fax: 86-10-64883508/64883519
    E-mail: [email protected]



    Overview of International Training Course on Numerical Control Technology

    September, 2004
    Wuhan, China
    Working language: English

    Objectives:
    It will promote the communication and corporation in development and application of numerical control technology between our country and trained developing country and improve the ability of independent development and practicing application of numerical control technology of those countries; it will promote the combination between external science and technology and technology and economics aid, improve the famous of our numerical control products, which have high quantity and the price are relatively low, acquaint as early as possible the rule and convention of vendition of international market, and in the end, reach the purpose to the export of technology and equipment and the participation in the participation in the international market; it will bring along the export of numerical control machine tool, NC special machine and other related products, contribute to the policy of “expand the export of mechanical and electronic products “and the construction of the free tradition region between China and East Union.
    Programs:
    1. The lectotype of Century Star NC system;
    2. Operation and programming of NC lathe;
    3. Operation and programming of NC milling machine;
    4. Debugging of Century Star NC system;
    5. PLC programming;
    6. Diagnose and remove of common trouble;
    7. Electricity design of typical NC lathe and milling machine;
    8. Compatibility design of electromagnetism of NC system.
    Organizer:
    Wuhan Huazhong NC Corporation, Ltd.
    Address: Science and Technology Garden, Miaoshan Region, High and New Technology Region of East-Lake, Wuhan, China
    Postcode: 430223
    Coordinators: Xiong Qingping
    Tel: 86-27-87180007
    Fax: 86-27-87180007
    E-mail: [email protected]



    International Training Workshop on Standard Diagnostic Techniques of livestock health diseases

    August 9-20, 2004
    Lanzhou, China
    Working language: English

    Objectives:
    The training workshop will introduce the development of diagnostic techniques of livestock health diseases, especially standard diagnostic techniques, and the application of new technologies in veterinary diagnosis. To understand well these diagnostic techniques will practice some diagnostic methods. It will help to improve abilities of veterinary diagnosis and to develop standard diagnostic techniques in developing countries, to make progress in preventing livestock from infectious diseases and to overcome behindhand quarantine problem in international trade of animal products. Meanwhile, to visit GMP factories and their products of preventing livestock infectious diseases and to discuss cooperation possibility between developing countries in the section of preventing livestock infectious diseases.
    Programs:
    1. Development of diagnostic techniques of livestock health diseases;
    2. Application of new technologies in veterinary diagnosis;
    3. Experimental standard methods practice;
    4. GMP factories and their products visits;
    5. Exchange of technical experiences.
    Organizer:
    Lanzhou Veterinary Research Institute, Chinese Academy of Agricultural Sciences
    Address: No. 11 Xujiaping, Yanchangbao, Lanzhou, China
    Postcode: 730046
    Coordinators: Yin Hong, Liu Zaixin, Lu Bingyi
    Tel: 86-931-8342515/8342166/8342587
    Fax: 86-931-8342515/8340977/8342052
    E-mail: [email protected]
    [email protected] public.lz.gs.cn



    Training Workshop on Application Technology of Standardization Production for Developing Countries

    September 5-19, 2004
    Beijing, China
    Working language: English

    Objectives:
    We plan to offer a training course on Application Technology of standardization for developing countries. This course aims to make trainees developing countries know standards of trade, laws and techniques required by WTO principles, and demands of developing countries on standardization. It also aims to impel developing countries to pay more attention to the technique of ISO and promote the international trade of our country to develop in these fields. During this training, we may show the standardization achievements of our country and strengthen the cooperation on technique and trade in the world.
    Programs:
    1. Development trend of China’s technical standards after its WTO entry;
    2. Strategies of industry development and technical standards of China;
    3. Standardization of precision instrument;
    4. Practice and survey of agricultural Standardization;
    5. Standardization of local agricultural products;
    6. Nuisance free measuring standards of agricultural products;
    7. China’s technology standards of industrial products;
    8. China’s technology standards of agricultural products;
    Organizer:
    Beijing Bureau of Quality and Technical Supervision, Beijing Training Center on Quality and Technical Supervision
    Address: No. 14 Yiqu, Anyuandongli, Andingmenwai, Beijing, China
    Postcode: 100029
    Coordinators: Zhou Chunlai, Cai Jingrong
    Tel: 86-10-64926207/64928992
    Fax: 86-10-64917370
    E-mail: [email protected]



    Training Workshop on Cataract & Intraocular Lens Implantation

    June, 2004
    Jinan, China
    Working language: English

    Objectives:
    Through the training, all participates are expected to know the basic theory about cataract, the history and tendency of intraocular lens, the indications for surgery, pre-operative preparations and different kinds of anesthesia. And are expected to be skilled in cataract& IOL manipulation under microscope in wet-lab. After the training, all participates can teach their students when coming back thus to help more cataract patients with their blindness. Through the training course we can strengthen and broaden the international exchange and cooperation, making great contributions to the health of people all over the world.
    Programs:
    1. History of IOL, operation facilities, pre-operative preparations, anesthesia;
    2. ECCE & Small incision ECCE;
    3. Phacoemulsification;
    4. Complications & management;
    5. Operation video.
    Organizer:
    Jinan Municipal Center Hospital Clinical Medical College of Shandong University
    Address: No. 105, Jiefang Road, Jinan, Shandong, China
    Postcode: 250013
    Coordinators: Jia Tanghong, Zang Yixiu, Wang Guoxing
    Tel: 86-531-6961724 Fax: 86-531-6961724
    E-mail: [email protected]



    International Training Class of Cardiovascular and Cerebral Artery Disease Treatment by Traditional
    Chinese Medicine

    June, 2004
    Guiyang, China
    Working language: English

    Objectives:
    To enhance the understanding the mechanism, the production and the R&D, growing and processing of Traditional Chinese Medicine (TCM); to know the special medical herbs resources and the development of TCM and its industries of Guizhou Province; to know about the medicines for the most fields of diseases and it’s related TCM enterprises of Guizhou Province; and to setup the channel and base for the medical products exporting; to investigate the possibilities for the establishment of the branch agents, sales representative and production line aboard; to effectively extend the industrial advantage of TCM and its fame.
    Programs:
    1. Brief introduction of traditional Chinese medicine theory;
    2. Traditional Chinese medicine theory about the cardiovascular and cerebral artery disease;
    3. Diagnosis and treatment on the basis of an overall analysis of the illness and the patient’s condition for the cardiovascular and cerebral artery disease;
    4. TCM theory about the cardiovascular and cerebral artery disease;
    5. Introduction about the TCM for the cardiovascular and cerebral artery disease: injection, capsules, tablets;
    6. The production techniques of TCM medicines;
    7. The current situation about the TCM modernization program;
    8. Introduction about the TCM resources of guizhou, China;
    9. The GAP technology of TCM.
    Organizer:
    S&T Foreign Exchange Center of Guizhou Province, Guizhou Shenqi Group Corporation
    Address: 1 Beijing Road,Guiyang, Guizhou, China
    Postcode: 550002
    Coordinators: Hu Zhigang, Song Zhicheng
    Tel: 86-851-6776445/5815263
    Fax: 86-851-6776445/5827452
    E-mail: [email protected];
    [email protected]



    Agrochemicals Technology Training

    May 10-25, 2004
    Changsha, China
    Working language: English

    Objectives:
    To introduce new theories, new technologies and new products of agrochemical research in China, especially new achievements in the field; to establish cooperationship between agrochemical researchers as well as manufacturing, management personnel and experts abroad, who can discuss together about the latest development trends of global agrochemical technologies; to promote the patented new technologies and products in the agrochemical field to the international market, especially to the developing countries; to enlarge the export of agrochemical technologies and products and to improve the state status in the global agrochemical industry.
    Programs:
    1. To learn the basic theories and knowledge of pesticides research technology and production process;
    2. To learn new methods and knowledge of pesticides production and management;
    3. To learn pesticides research theories, new achievement and new technologies;
    4. To learn features and advantages of some pesticides technologies and equipments.
    Organizer:
    Hunan Research Institute of Chemical Industry
    Address: No. 399, Furong Road(M), Changsha, Hunan, China
    Postcode: 410007
    Coordinators: Yang Hui, Yu Shuying
    Tel: +86-731-5520311
    Fax: +86-731-5520311
    E-mail: [email protected]



    International Training Course of Efficient Irrigation Technique

    June, 2004
    Shihezi, China
    Working language: English

    Objectives:
    Introduce Tianye under-mulch film irrigation system which is fit in local area and arid and half-arid area and its economical social profit to the manager and technician; Teach the corresponding water saving technique; Mass-export our water saving irrigation product to the developing countries, strengthen the international competition capacity of domestic water saving company.
    Programs:
    1. The general developing situation of the water saving irrigation technique;
    2. The economical profit analyse of under-mulch film irrigation;
    3. The programming design and installation of under-mulch film irrigation system;
    4. The debugging and management of under-mulch film irrigation system;
    5. The drip fertilizer technique of under-mulch film irrigation system;
    6. The crop planting of under-mulch film irrigation system.
    Organizer:
    National Center of Efficient Irrigation Engineering and Technology Research-Xinjiang
    Address: No. 36, Beisandong Road, Economic and Technique Developing Zone, Shihezi, Xinjiang, China
    Postcode: 832000
    Coordinator: Chen Mingzhu
    Tel: 86-993-2623145/2623200
    Fax: 86-993-2623148
    E-mail: [email protected]



    The Technology of Mining truck and engine mechanic Training Course

    June, 2004
    Hohhot, China
    Working language: English

    Objectives:
    Inner Mongolia North Hauler Joint Stock Limited Company (abbreviated in English: NHL) was founded in 1988. The total property of the company is RMB 850 million. The company is a Chinese and Westerner joint stock new high-tech company which is specialized in manufacturing rigid dump trucks, articulated dump trucks, the relevant converted trucks and construction machinery with total over a dozen type of different equipment. The company keep introducing new technology from foreign countries, at the same the company pay much attention to our self-ability building, so they produce many kinds of product. Our product have export to many foreign countries, such as Mongolia, New Zealand etc.
    Through the training course to related famous company of international market, we hope to make them master the technology of our product. For this purpose, the training will improve the international friendship and move forward the application of heavy duty mining trucks and engine mechanic level for the trained country. Additionally, this training will make Inner Mongolia North Hauler Joint Stock Limited Company well-known in international market, and enlarge the export business.
    Programs:
    1. Operation method of the mining truck;
    2. Operation method of the engine mechanic;
    3. Fix method of the mining truck and engine mechanic.
    Organizer:
    Inner Mongolia North Hauler Joint Stock Limited Company
    Address: Beizhong Road, New High-Tech District, Baotou, Inner Mongolia, China
    Postcode: 014030
    Coordinator: Xue Jianmin
    Tel: 86-472-2207888-2601
    Fax: 86-472-2207538
    E-mail: [email protected]



    Project of Hybrid Rice Training Course in Indonesia

    May 15-June 14, 2004
    Indonesia
    Working language: English

    Objectives:
    Tackling technical problems occurred in the course of developing hybrid rice in Indonesia, and let more and more agricultural experts and farmers mastering hybrid rice techniques as soon as possible; localizing the high yield cultivation techniques of hybrid rice in Indonesia.
    Programs:
    1. Basic theory of hybrid rice;
    2. The strategic idea about 3 steps in developing hybrid rice breeding, i. e. from intervarietal to intersubspecific, at last distant heterosis utilization in the view of heterosis level and from 3-line (A,B and R lines) to 2-line (PGMS or TGMS and R lines), at last 1-line (apomixes);
    3. Techniques on breeding, seed production and cultivation of hybrid rice;
    4. Seminars;
    5. Field trip and visiting.
    Organizer:
    Yuan Longping High-tech Agriculture Co.,Ltd.
    Address: 9F, Securities Building, No. 329, Chezhan (N) Road, Changsha, Hunan, China
    Postcode: 410001
    Coordinators: Chen Yidan
    Tel: 86-731-2183892
    Fax: 86-731-2182723
    E-mail: [email protected]



    International Automobile Technical Training Course for Developing Course

    September 1-10, 2004
    Changchun, China
    Working language: English

    Objectives:
    Providing the automobile technical assistance to the developing countries; training the automotive technicians from the developing countries to enhance the automotive industry developing of those countries; strengthening the international cooperation and exchange to extend Chinese automotive products influence over the world; displaying the achievements and relevant products of Chinese automotive industry and promote the export business to those countries.
    Programs:
    1. Chinese automotive industry status and prospect;
    2. Automotive technique theory; manufacturing know-how and technology;
    3. Advanced management system and experience of FAW;
    4. Automotive quality control and maintenance;
    5. Field visiting and study.
    Organizer:
    China first Automobile Group Corporation
    Address: No.99 Dongfeng Street, FAW, Changchun, China
    Postcode: 130011
    Coordinator: Che Qiang
    Tel: 86-431-5905434
    Fax: 86-431-7614780
    E-mail: [email protected]



    International Training Course on Practical Technology of Small Wind/PV
    Generating System

    June 15-29, 2004
    Hohhot, China
    Working language: English

    Objectives:
    To introduce the achievements of in search and exploration in the field of small Wind/PV generating systems; to promote transformation of China’s technology to developing countries; to expand multilateral technical cooperation and international exchanges.
    Programs:
    1. Introduction of the basic knowledge, working principle and conditions of wind charger and PV;
    2. Explanation in detail of the technical features and system combination of Chinese wind charger, PV module, charging controller, inverter, battery and other equipment; and pass on some practical technologies, including the installation, maintenance and problem solving;
    3. Visit and investigate related manufactures and users.
    Organizer:
    China Council for the Promotion of International Trade Machinery Sub-Council (CCPIT-MSC)
    Address: No.46 Sanlihe Road, Beijing, China
    Postcode: 100823
    Coordinator: Gao Lihong
    Tel: 86-10-68594985
    Fax: 86-10-68533354
    E-mail: [email protected]



    International Training Course on the Theory and Technology of Plant Protection for Sustainable Agriculture in 21st Century

    September 2-21, 2004
    Shenyang, China
    Working language: English

    Objectives:
    Sustainable agriculture is the mainstream for the agricultural development in 21st century; the theory and practice of modern plant protection are the important parts of sustainable agriculture; so the expanding of modern theory and technology of plant protection is the important way for improving the ecological environment, assuring the continue increasing of food and vegetable production and enhancing the quality and benefits of agricultural crop; in the course of the theory and technology of plant protection for sustainable agriculture of 21st century, the new technology and progress of plant protection for sustainable agriculture will be introduced, the specialists of plant protection will be trained; in addition, the training course also can be beneficial for international technical cooperation and exchanges.
    Programs:
    Part 1 Lectures
    1. The theory and practice of the integrated pest management in sustainable agriculture;
    2. The theory and practice of the integrated underground insect management;
    3. The etiology, epidemiology and forecasting system of fungi disease;
    4. Bio-control principal and application;
    5. The bio-control agent separating and identifying of fungi and bacteria from soil;
    6. The separating and identifying of plant virus;
    7. The separating and identifying of plant parasitic nematodes.
    Part 2 Practice and technical research
    1. The invention and application of bio-pesticide;
    2. The management of the resistance to pesticide in China;
    3. The evaluation and assays of agricultural environment by insects;
    4. Trichogramma used to control maize bollworm in Northeast of China;
    5. Fungi used to control nematodes in China;
    6. The control of environment and integrated pest management in greenhouse;
    7. The theory and application of resistant gene engineering for plants.
    Part 3 Visit and Discussion
    1. To visit the no pollution vegetable base;
    2. To visit the model field of modern industry agriculture;
    3. To discuss the integrated pest management in sustainable agriculture;
    4. Presentation of papers from participants about current situation of plant protection in your own countries;
    5. Exchange of experiences and discussion among participants.
    Organizer:
    Shenyang Agricultural University
    Address: No.120 Dongling Road, Shenyang, China
    Postcode: 110161
    Coordinators: E Jian, Duan Yuxi
    Tel: 86-24-88421266
    Fax: 86-24-88417416
    E-mail: [email protected]



    International Training Course on the Technology of Miniature Agricultural Machinery

    August 10-30, 2004
    Tai’an, China
    Working language: English

    Objectives:
    To train the policy makers, management personnel and technicians of Agricultural Machinery; to display the advanced technology and adaptability of china’s agricultural machinery; to promote the south-south cooperation in the field of agricultural machinery; to encourage the international competitiveness of china’s agricultural machinery; to popularize the achievement of opening up to the outside world and reform policy, to promote friendship among the people of developing countries.
    Programs:
    1. China’s agricultural machinery-present and future;
    2. China’s agricultural mechanization policy and management model;
    3. China’s new technology on agricultural machinery and equipment. Its adaptability to Asia-Africa countries;
    4. Technical visit and business meeting.
    Organizer:
    Shandong Agricultural University
    Address: No.61 Daizong Street, Tai’an, Shandong, China
    Postcode: 271000
    Coordinator: Li Jinjing
    Tel: 86-538-8242003
    Fax: 86-538-8242336
    E-mail: [email protected]



    Water Environment Protection and Water Pollution Treatment

    April 1-15, 2004
    Wuhan, China
    Working language: English

    Objectives:
    To introduce essential knowledge of environmental science; to introduce methods and experience of water protection; to introduce technology and method for the control of water pollution; to promote the cooperation in environmental protection projects as well as education and training of environmental profession.
    Programs:
    1. Conspectus of environmental science;
    2. Theory of sustainable development;
    3. Theory of water ecosystem and pollution ecology;
    4. Wetlands protection;
    5. Technology and methods of water pollution control;
    6. Scheme and management of environment.
    Organizer:
    Institute of Hydrobiology, Chinese Academy of Sciences
    Address: No.7 Donghu South Road, Wuhan, China
    Postcode: 430072
    Coordinators: He Feng, Li Jin, Wu Zhenbin
    Tel: 86-27-87214832/62225633/62225528
    Fax: 86-27-87647675
    E-mail: [email protected]
    Liking [email protected]



    The International Workshop of Dependent Plantation Planting Technology

    April, 2004
    Weifang, China
    Working language: English

    Objectives:
    To make the students have a deep understanding of the dependent plantation planting technology by about two weeks’ study and discussions, Meanwhile, the students could hold the basic theories and main points of planting, and could plant independently and extent the technologies after their going back, Therefore, the training workshop will display the scientific and technological achievement of Chinese agriculture, and strengthen the international cooperation and exchange between China and other countries.
    Programs:
    1. The introduction to the basic theories of dependent plantation planting technique;
    2. The introduction to the basic theories of dependent plantation planting technique and standardized planting;
    3. The technique of fertilization on the leaves of vegetable;
    4. The green vegetable planting technology;
    5. The biologic prevention and cure technique of green vegetable planting;
    6. The physical prevention and cure technique of green vegetable planting;
    7. The plantation and use of the new-special vegetable;
    8. The technique of standardization to green vegetable planting;
    9. The planting technique of none toxicity tomato;
    10. The planting technique of green watermelon;
    11. Visiting and review.
    Organizer:
    Weifang External Sciences & Technology Exchange Center
    Address: No.318 Shengli Street, Weifang, Shangdong, China
    Postcode: 261041
    Coordinators: Wang hui, Mu Hongwei
    Tel: 86-536-8232300
    Fax: 86-536-8232300
    E-mail: [email protected]

  • 阿斯顿发水电费撒地方 2019-06-14
  • 夺取新时代中国特色社会主义伟大胜利 2019-06-09
  • 你来我往!巴萨黑城墙"空中拦网" 澳洲队长点射1-1! 2019-06-08
  • 2018“我们的中国梦”文化进万家活动在兰考启动 2019-06-08
  • 新华社评论员:弘扬伟大民族精神 凝聚强大精神动力——一论习近平总书记在十三届全国人大一次会议上的重要讲话 2019-06-08
  • 北京市安全生产督察组进驻三部门 开始为期三周安全生产督察工作 2019-06-08
  • 财经 —频道 春城壹网 七彩云南 一网天下 2019-06-07
  • 在全面从严治党上要有新作为 2019-06-07
  • 从三大视角透视中国经济新活力:经济结构更优 2019-06-07
  • 2017空调产业报告显示:线上零售额占比攀升 2019-06-06
  • 新时代新平台新机遇“一带一路”大型网络主题活动 2019-06-06
  • 150秒!速览习主席青岛峰会精彩瞬间 2019-06-06
  • 外媒热议习近平讲话:中国军队现代化速度超越西方想象 2019-06-06
  • 自然型社会和规则性社会,是会随着科技的改变而发生改变的,当然只有规矩也就是制度才能规范人的行为,所以国家是不会灭亡的,但国家的形式是会发生改变的。 2019-06-05
  • 婆媳矛盾引家庭纠纷 司法调解续亲情促和谐 2019-06-05
  • 国际米兰吧 嫩模比基尼派对 北京赛车开奖记录 快乐十分钟开奖结果 天津福彩15选5走势图 尤文图斯球迷社区 魔兽世界狼人 老重庆时时彩开奖号码 瓦赫达对伊蒂哈德预测 尤文vs弗罗西诺内视频直播